Tally Dascom 1140
9
3. As shown in the picture on
the right side, click “OK” to
select automatical
installation and click
“Cancel” to select manual
installation.
If you have selected automatical installation in the third step, please refer to
following three steps:
1) If you want to select
automatical installation,
make sure that the printer is
connected with USB cable
and power on. If the printer
is not connected with USB
cable or power off, a prompt
on right side will appear if
you select automatical
installation. Click “OK” to
select manual installation
and click “Cancel” to cancel
installation.
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...
