Tally Dascom 1140 - Interface Setup

Tally Dascom 1140
26
Paper Setup
Valid Settings
Function
Bail mode
Invalid,Standard,
Special
The pressure lever presses the paper against the
print platen during printing, but it is released for
paper loading.
Invalid: If you uninstall the lever or want to disable
the function, set this setting to “invalid”.
Standard: Release the lever for paper loading and
lower the lever to press the paper against the
platen during printing.
Special: When the paper is in tear-off position, after
the printer received printing data, the printer will
judge whether tear-off was implemented first. If
tear-off was implemented and printing position is in
lever area, then the printer will press the lever; If
tear-off was not implemented, the printer will not
press the lever.
Roll Paper
No, Yes
In friction mode, 【LF/FF】will not eject the paper
and feed to next page. (Assume roll paper)
5.3 Interface Setup
Interface setup
Valid Settings
Function
PnP
No, Yes
No: Disables plug and play for USB
Yes: Enables plug and play.
USB ID
No, Yes
No: Disables USB ID.
Yes: Enables USB ID
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es