Tally Dascom 1140 - Printer Setting Changes; System Setup

Tally Dascom 1140
23
5 Printer Setting Changes
In order to meet specific print requirements, the printer configurations may be changed as
follows: Hold down the Load/Eject key while powering on the printer and then release the
key when the print head starts to move. The printer will enter Main Menu setup state. Follow
the instructions printed on how to make setting changes. When a new setting is saved, it is
retained after the printer has been powered off.
The Printer Settings menu contains 8 sub-menus: System Setup, Paper Setup, Interface
Setup, Character Setup, Other Setup, Bi-directional Alignment, BlackMark Mode,Restore
Facotry Defaults.
5.1 System Setup
System setup
Valid Settings
Function
Language
English,Deutsch,
Poccия,
Italiano,Français,Españ
ol, Türkçe, Português
Allows user to select one of the following
languages: English, German, Russian, Italian,
French, Spanish and Turkish, Portuguese
Emulation
ESC/P2, IBM 2380+
Selects the printer emulation. This should be the
same as the host printer driver.
Auto CR
(ESC/P2)
No, Yes
Yes: LF = LF+CR; No: LF = LF
(Applies to ESC/P2 emulation only)
Auto CR(IBM)
No, Yes
Yes: LF = LF+CR; No: LF = LF
(Applies to IBM emulation only)
Auto LF
No, Yes
Yes: CR = CR+LF; No: CR = CR
Print Dir
Bi-Dir, Uni-Dir
Bi-Dir: Graphics and text are printed in both
directions, resulting in faster printing speed.
Uni-Dir: Graphics and text are printed from left to
right, resulting in higher precision.
Zero
0, Ø
0: No-slashed Zero 0.
Ø: Slashed Zero Ø.
Graphic Speed
Normal, Fast
Selects different print quality and print speed for
graphic.
Change Pin#1:
No, 1, 2, 3, 4, 5, 6, 7, 8,
9
Defines the first broken / worn out pin. This pin
will be substituted by an adjacent pin in the
second pass printing.
No: Not to substitution of the worn out pin.
Change Pin #2
No, 1, 2, 3, 4, 5, 6, 7, 8,
9
Defines the first broken / worn out pin. This pin
will be substituted by an adjacent pin in the
second pass printing.
No: No substitution.
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es