Tandy 1000 Technical Reference Manual

Tandy 1000
(d) Digital volt meter
(e) DC clip-on ammeter
(f) Thermometer and hygrometer
(2) Tools
Technical Reference Manual
(a) Cross-point screwdrivers, M2.6 and M3
(b) Common screwdrivers, small size and medium size
(c) Hexagon wrench key, 1.5mm
(d) A pair of tweezers
(e)
Round
nose pliers
(fl
Cutting pliers
(g)
Solder and
soldering
iron
(h)
Hexagon
screwdriver,
M3
(3) Special jigs
(a) MAX media jig (Jig D, PIN 17890746-01)
(4) Disks
(a) Work disk (commercially available disk)
(b) Cleaning disk (commercially available cleaning disk)
i) Single sided type
ii) Double sided type
(c) Level disk (PIN 14900015-00)
(d) Alignment disk
i) Single sided, 48tpi type (PIN 14900016-20)
ii) Double sided, 48tpi type (PIN 14900016-21)
- 4008 -

Tandy 1000 Specifications

General

Processor	Intel 8088
Processor Speed	4.77 MHz
RAM	128 KB (expandable to 640 KB)
Operating System	MS-DOS 2.11
Manufacturer	Tandy Corporation
Release Year	1984
Storage	Single or double 5.25" floppy disk drive (360 KB), optional hard drive
Sound	Tandy 3-voice sound
Ports	Parallel, Serial
Graphics	CGA (Color Graphics Adapter)
Graphics Modes	320x200, 640x200