Tandy 1000 Technical Reference Manual

Tandy 1000 Technical Reference Manual
i) Inferior disk:
Disk and/or jacket is deformed or damaged. Replace the work disk
with a new one.
·ii) Inferior head flexture:
Because of the failed performance of the bailor the CSS Ass'y in
item 4-4-3, the flexture on which the head piece is located may
be deformed. Remove the disk. Then open and close the front lever
slowly to observe the gap between the side 0 and the side 1 heads
from the front bezel. If the two head surfaces are not in parallel
each other, it is considered to be the deformation.
Replace the head carriage Ass'y according to item 4-5-1.
- 4052 -

Tandy 1000 Specifications

General

Processor	Intel 8088
Processor Speed	4.77 MHz
RAM	128 KB (expandable to 640 KB)
Operating System	MS-DOS 2.11
Manufacturer	Tandy Corporation
Release Year	1984
Storage	Single or double 5.25" floppy disk drive (360 KB), optional hard drive
Sound	Tandy 3-voice sound
Ports	Parallel, Serial
Graphics	CGA (Color Graphics Adapter)
Graphics Modes	320x200, 640x200