Format (Diskette)
The backup diskette must be formatted before it can be used.
NOTE
AT THIS POINT, YOUR ORIGINAL DOS DISKETTE
SHOULD STILL
BE IN
DRIVE A:.
1.
In response to the
A>
DOS prompt,
Type:
Press:
(Return)
The following prompt will appear on your monitor screen:
I
Insert
a
new diskette
in
drive A: and press
any
key when ready
f
2.
In response
to
this prompt,
Remove the original DOS diskette, and insert the diskette
on which you wish to make your backup copy of DOS. Close
the door of the diskette drive.
1
-
34
To Next Page
Loading...
