Tandy 1200 HD - To Start DOS Again (System Reset)

m:
To Start DOS Again (System Reset)
Explanation Of Task: Sometimes you may wish to start over
from the beginning - to go back to the original DOS date
prompt display.
NOTE
THIS PROCEDURE WILL CAUSE ANY
PROGRAM IN PROGRESS TO BE STOPPED. ALL
INFORMATION WILL BE LOST
IF IT IS NOT
FIRST SAVED ON MAGNETIC DISK.
Procedure:
Press and hold:
(5) and (A't)
Press: (oel)
Release all three keys.
In a few seconds, the computer will reload
DOS and display
the original date prompt.
MS-DOS 2.XX Rev. 2.X (A)
Copyright 1981,82,83 Microsoft Corp.
Command v. 2.XX
Current date is Fri 1-04-1980
Enter new date:
/
2 - 22