Task:
To
Change The Default Drive
Explanation
Of
Task: Your monitor screen tells you which drive
has been established as the default drive. (See Section
2.2
for
an explanation of the default drive.) If the diskette drive is the
default drive, the DOS prompt displayed on your monitor screen
will be the
A>
symbol;
if
the fixed disk drive is the default
drive, the
DOS
prompt displayed on your monitor screen will
be the
C>
symbol.
Default status can be easily changed.
Procedure:
a. If the DOS prompt is the
A>
symbol,
Type:
Press:
(Return)
The
DOS
prompt will now appear
as
the
C>
symbol;
the fixed disk drive is now the default drive.
b.
If
the DOS prompt is the
C>
symbol,
Type:
Press:
(Return)
The DOS prompt will now appear as the
A>
symbol;
the diskette drive is now the default drive.
2
-
23
To Next Page
Loading...
