1500
HD Laotor, Commter
2.
Use the arrow keys to select the parameter.
Then, use the spacebar to press the desired
button.
Notes:
When you select Automatic Floppy Disk
Standby, Hard Disk Timeout, Display Timeout,
Low Power Tone, and the speaker,
x
appears in
the boxes.
Type in the minutes and seconds to change the
Display Timeout in the range
0-255
minutes.
3.
When you have selected the desired parame-
ters, press Fn-the options menu appears. Use
the arrow keys to select one of the following op-
tions:
Save-Press
ENTER
to immediately activate the
parameters you selected.
Factory Settings-Press
ENTER
and respond to
the
confirmation
dialog
box.
ExitlEsc-Press
ENTER
to
exit the Power pro-
gram and return to the previous parameters.
If
you selected changes on the Power menu, an
additional dialog box appears to give you one
more chance to accept
or
reject the changes.
36
To Next Page
Loading...
