Tandy 1500HD - Using Power-Management Line Commands

1500 HD Laptop Computer
USING POWERaANAGEMENT
LINE COMMANDS
You can also use command lines to set the op-
tions, without entering the menu mode. The com-
mand-line mode is useful if you want
to include op-
tions in batch files.
Floppy Disk Standby command-lines:
power15 / f dst andby-displays the current
status
of the Automatic Floppy Disk Standby
Mode
power15 /fdstandby: enable-enables the
Automatic Floppy Disk Standby Mode and dis-
plays a status message
power15 /fdstandby : disable4isables
the Automatic Floppy Disk Standby Mode and
displays a status message
Beeper command-lines:
power15 /beeper-displays the speaker sta-
tus
power15 /beeper : enable-enables the
speaker
power15 /beeper : disable4isabIes the
speaker
You can turn
off the speaker so that no sounds
come from the computer while the power is
turned on.
Low
Power Indicator command-lines:
power15 /lpbeep--displays the Low Power
Beeper status
power15 /lpbeep: enable-enables the Low
Power Beeper and displays a status message
power15 /lpbeep : disable-disables the
Low Power Beeper and displays a status mes-
sage
40