Tandy 1500HD - Running Non-Deskmate Programs from Deskmate

1500 HD Laptop Computer
Be sure the target diskette is not write-protected
(window should be closed).
Diskcopy formats the target diskette
(if not al-
ready formatted) and copies the information
taken from the source diskette to the target
diskette. In some instances, MS-DOS might ask
you to swap the source and target diskettes one
or more times. When the Diskcopy procedure is
complete, this message appears:
Copy another diskette (Y/N) ?
7. To create more copies, press Y ENTER, and fol-
low the prompts again.
After you finish making copies, press
N at the
Copy another diskette? prompt. You now auto-
matically return to DeskMate.
Use one set of the copies for daily use. Store the
original diskettes and all additional copies in a safe
place until you need them.
RUNNING NON-DESKMATE
PROGRAMS FROM DESKMATE
Programs perform specific tasks such as word
processing, spreadsheet analysis, and creating
graphics.
You can use the following procedure to
add non-DeskMate programs to the DeskMate
desktop
so that you can run the programs by sim-
ply selecting a DeskMate icon.
When the desktop appears, you can run non-
DeskMate programs by following these steps:
1. Press n to select the desktop menu.
52