51
Model C606 Important: To the Operator
120515
Selecting the CALIBRATION symbol again will
return to the Menu list.
Note: In order to display the machine details in the
system information screen, the model and serial
number information must have been previously
entered into the EDIT UNIT ID screens in the
Service Menu.
The CURRENT CONDITIONS screen provides the
viscosity readings for the product when the machine
is running and the hopper and barrel temperatures
for both sides of the machine. The left column
displays the readings for the shake side and the
right column displays the soft serve side readings.
(See Figure 99.)
VISC 0 0.0
HOPPER 38.0 38.0
BARREL 25.0 18.0
Figure 99
CURRENT CONDITIONS is the only Menu screen
that will return the left and right side control panel
keys to normal operation. The Menu keys will not be
lit when this option is selected so shakes can be
dispensed and all panel touch keys are fully
functional. Use this screen when you wish to remain
in the Manager's Menu and dispense a shake.
Exit the CURRENT CONDITIONS screen and return
to the Menu by selecting the CALIBRATION symbol
.
Dispensing Shake Without Syrup
Beginning with software version 1.04, shakes can be
dispensed without flavoring by selecting the left side
pump symbol
.
Figure 100
The following screen will display.
UNFLAVORED DRAW
> YES
NO
Figure 101
Select the CALIBRATION symbol
. The left side
PUMP symbol illuminates and unflavored product
immediately starts to dispense. The unflavored draw
ends and the PUMP light extinguishes when the
pyroelectric sensor detects the cup is full. The
unflavored draw can also be terminated by selecting
the PUMP symbol a second time.
Note: To cancel the UNFLAVORED DRAW screen,
touch the OPTIONAL FLAVOR symbol to move the
arrow to “NO”, and select the CALIBRATION symbol
.
To Next Page
Loading...
