21
X44127 Brush Kit Assembly (See Figure 12)
ITEM
PART NO. DESCRIPTION QTY. FUNCTION WARR.
CLASS
1 013071 Black Bristle Brush 1 Used to clean rear shell bearing
and mix pump drive hub.
000
2 013072 Double End Brush 1 Used to clean o-rings, holes in
metal parts, piston grooves, mix
inle t tube, mix inlet adapter, o-ring
all grooves, draw valve core, valve
caps, syrup line port holes in
freezer door, syrup container feed
tube, retaining pin, handscrew,
pivot pin, and mix feed tube.
000
3 013073 White Bristle Brush
(1” x 2”)
1 Used to clean the product entry
ports in back of freezer door,
scraper blade, draw handle, beater
drive shaft, spinner blade, and drive
shaft boot seal.
000
4 014753 White Bristle Brush
(1-1/2” x 3”)
1 Used to clean the agitator and the
draw valve core in the freezer door.
000
5 033059 White Bristle Brush
(1/2” x 3”)
1 Used to clean the topping pump. 000
6 050103 Brush Set (3) 1 Used to clean the syrup port holes
and syrup valve retainer port holes.
000
7 039719 Yellow Bristle Brush 1 Used to clean the syrup ports and
door spouts.
000
8 023316 White Bristle
(3” x 7”)
1 Used to clean the mix hopper,
pump cylinder, hopper cover, parts
tray, drip pans, beater, front
bearing, splash shield, front drip
tray, and piston.
000
9 054068 Brush -Pump Spout 1 Used to clean the topping pump. 000
Figure 12
Downloaded from www.dlmanuals.com
To Next Page
Loading...
