Taylor McDonald's C602 - Parts Replacement Schedule

98
PARTS REPLACEMENT SCHEDULE
PART
DESCRIPTION
EVERY
3MONTHS
EVERY
6MONTHS
ANNUALLY
Scraper Blade-Shake X
Scraper Blade-Soft Serve X
Drive Shaft Seal X
Freezer Door O-Ring-Shake X
Freezer Door Gasket-Soft
Serve
X
Front Bearing X
Front Beater Shoes -Soft Serve X
Draw Valve O-Ring X
Spinner Shaft Seal-Shake X
Restrictor Cap-Shake X
Mix Feed Tube O-Ring X
Pump O-Ring X
Pump Valve Gasket X
Mix Feed Tube Check Ring X
Pump Drive Shaft O- Ring X
Syrup Valve-Duckbill X
Peristaltic Pump Tubes Inspect & Replace if Necessary Minimum
White Bristle Brush, 3” x 7” Inspect & Replace if Necessary Minimum
White Bristle Brush, 3” x 1/2” Inspect & Replace if Necessary Minimum
White Bristle Brush, 1 -1/2” x 3” Inspect & Replace if Necessary Minimum
White Bristle Brush, 1” x 2” Inspect & Replace if Necessary Minimum
Black Bristle Brush, 1” x 2” Inspect & Replace if Necessary Minimum
Double-Ended Brush Inspect & Replace if Necessary Minimum
Yellow Bristle Brush Inspect & Replace if Necessary Minimum
Brush Set (3) Inspect & Replace if Necessary Minimum
Downloaded from www.dlmanuals.com