32
Symbol Definitions
To better communicate in the International
arena, the words on many of our operator
keys have been replaced by symbols to
indicate their functions. Your Taylor equipment
is designed with these International symbols.
The following chart identifies the symbol
definitions.
=AUTO
= HEAT CYCLE
= WASH
=MIXPUMP
= STANDBY (SHAKE)
= STANDBY (SOFT SERVE)
= FLAVOR SELECTION
=MIXLOW
= MIX OUT
= TOPPING HEATER-LEFT
= TOPPING HEATER-RIGHT
=CALIBRATE
= MENU DISPLAY
Power Switch
When placed in the ON position, the power
switch allows control panel operation.
Vacuum Fluorescent Display
The vacuum fluorescent display (VFD) is
located on the front control panel. During
normal operation the display is blank. The
display is used to show menu options and
notifies the operator if a fault is detected. On
International models, the display will indicate
the temperature of the mix in each hopper.
Indicator Lights
MIX LOW - When the MIX LOW symbol
is
illuminated, the mix hopper has a low supply
of mix and should be refilled as soon as
possible.
MIX OUT - When the MIX OUT
symbol is
illuminated, the mix hopper has been almost
completely exhausted and has an insufficient
supply of mix to operate the freezer. At this
time, the AUTO mode is locked out and the
freezer will be placed in the STANDBY mode.
To initiate the refrigeration system, add mix to
the mix hopper and touch the AUTO
symbol
. The freezer will automatically begin
operation.
Downloaded from www.dlmanuals.com
To Next Page
Loading...
