87
The CURRENT CONDITIONS screen provides
the viscosity readings for the product when the
side is running and hopper and barrel
temperatures for both sides of the machine.
The left column displays the readings for the
shake side and the right column displays the
sundae side readings. The bottom line in the
display indicates the current glycol
temperature. (See Figure 205.)
VISC 0 0.0
HOPPER 41.0 41.1
GLYCOL 41.0
Figure 205
CURRENT CONDITIONS is the only Menu
screen that will return the left and right side
control panel keys to normal operation. The
Menu keys will not be lit when this option is
selected so shakes can be dispensed and all
panel touch keys are fully functional. Use this
screen when you wish to remain in the
Manager’s Menu and dispense a shake. Exit
the CURRENT CONDITIONS screen and
return to the Menu by selecting the
CALIBRATION symbol
.
Dispensing Shake Without Syrup
Beginning with software version 1.04, shakes
can be dispensed without flavoring by
selecting the left side pump symbol
.
Figure 206
The following screen will display.
UNFLAVORED DRAW
> YES
NO
Figure 207
Select the CALIBRATION symbol .Theleft
side PUMP symbol illuminates and unflavored
product immediately starts to dispense. The
unflavored draw ends and the PUMP light
extinguishes when the pyroelectric sensor
detects the cup is full. The unflavored draw
can also be terminated by selecting the PUMP
symbol a second time.
Note: To cancel the UNFLAVORED DRAW
screen, touch the OPTIONAL FLAVOR
symbol to move the arrow to “NO”, and select
the CALIBRATION symbol
.
Downloaded from www.dlmanuals.com
To Next Page
Loading...
