Taylor McDonald's C602 - ORDERING AND SERVICE INFORMATION (Continued); Compressor Warranty Disclaimer and Refrigerant Notes

94
Problem Shake Side
Probable Cause
Soft Serve Side
Probable Cause
Either Side
Probable Cause
Corrective Action
No control
p
a
n
e
l
f
u
n
c
t
i
o
n
s
Machine is unplugged. Plug into wall receptacle.
p
a
n
e
l
f
u
n
c
t
i
o
n
s
with power switch ON.
Circuit breaker OFF or blown fuse.
Turn the breaker ON or replace the fuse.
The draw valve is not opening.
The power switch is off.
Place the power switch in the ON position.
p
g
Theshakesideisin the STANDBY mode.
Cancel the STANDBY mode.
A heat cycle is in progress.
Wait for the completion of the heat treatment cycle.
The menu is displayed, making the flavor select keys inoperative.
Exit the menu to restore the control keys to their normal function.
The draw valve wasn’t aligned with the actuator bracket when the freezer door was installed.
Reassemble with the correct alignment. Tighten the handscrews in a criss-cross pattern when installing the freezer door.
The draw valve was not lubricated.
Lubricate the draw valve and o’rings.
The shake actuator assembly is out of alignment or is malfunctioning.
Call an authorized service technician.
Downloaded from www.dlmanuals.com