Taylor PH90 - Parts Replacement Schedule

79
Model PH90 Parts Replacement Schedule
Section 9 Parts Replacement Schedule
PART
DESCRIPTION
EVERY
3MONTHS
EVERY
6MONTHS
ANNUALLY
Scraper Blade- Shake X
Scraper Blade- Soft Serve X
Drive Shaft Seal X
Freezer Door O- Ring- Shake X
Freezer Door Gasket- Soft Serve X
Front Bearing X
Beater Front Shoes- Soft Serve X
Draw Valve O- Ring X
Spinner Shaft Seal- Shake X
Pivot Pin O- Ring X
Design Cap- Soft Serve X
Restrictor Cap- Shake X
Mix Feed Tube O- Ring X
Pump O- Ring X
Mix Inlet Tube O- Ring X
Pump Drive Shaft O- Ring X
Pump Drive Shaft Cup Seal X
White Bristle Brush, 3” x 7” Inspect & Replace
if Necessary
Minimum
White Bristle Brush, 3” x 1/2” Inspect & Replace
if Necessary
Minimum
White Bristle Brush, 1- 1/2” x 2” Inspect & Replace
if Necessary
Minimum
White Bristle Brush, 1” x 2” Inspect & Replace
if Necessary
Minimum
Black Bristle Brush, 1” x 2” Inspect & Replace
if Necessary
Minimum
Double- Ended Brush Inspect & Replace
if Necessary
Minimum
Door Spout Brush Inspect & Replace
if Necessary
Minimum
Syrup Port Brush Inspect & Replace
if Necessary
Minimum