Need help?Do you have a question about the Taylor Wawa C708 and is the answer not in the manual?
Critical safety guidelines for personnel involved in machine installation.
Instructions for selecting and preparing the optimal location for machine installation.
Specifies required clearance for air intake and discharge on air-cooled models.
Details on connecting the cold water supply for water-cooled units.
Essential information on electrical codes, grounding, and wiring for installation.
Safety precautions and guidelines for working with refrigerants.
Procedures to ensure the beater rotates in the correct direction for operation.
Overview of machine operation, cleaning, and necessary maintenance for consistent product.
Explains limitations and conditions related to the compressor's warranty coverage.
Mandatory safety warnings to prevent injury and machine damage during operation.
Critical warnings and procedures to avoid electrical shock hazards.
Safety alerts for moving parts, hot surfaces, and product handling.
Guidelines for machine placement, air clearance, and ambient temperature.
Visual illustration of the machine's components with numbered parts.
Detailed listing of machine parts with descriptions and part numbers.
Identification of components specific to the single-spout door and beater mechanism.
Identification of parts related to the mix pump assembly.
List and visual identification of optional or related accessory items.
Identification of the specific cleaning brushes included in the package.
Identification and description of the main controls and indicators on the operator panel.
Explains the meaning of international symbols used on switches and indicators.
Describes the function and meaning of various status indicator lights.
Details the process and safety for resetting the beater motor overload.
Procedure for resetting the mix pump motor overload condition.
Instructions on adjusting the draw handle for portion control and product consistency.
Explains the LCD display's behavior during normal operation and fault conditions.
Describes the system checks and initialization sequence upon machine startup.
Comprehensive explanation of the Heat Treatment cycle, its phases, and requirements.
Information on hard lock conditions, their causes, and resolution steps.
Information on soft lock conditions, their causes, and resolution steps.
Details various messages indicating soft lock causes and required actions.
Steps to enter and navigate the Manager's Menu for settings adjustments.
Lists the various configurable settings and data logs available in the Manager's Menu.
How to view and reset the count of dispensed servings.
Procedure for setting the machine's internal clock and date.
Configuration options for Daylight Saving Time adjustments.
How to schedule the automatic start time for the Heat Treatment cycle.
Setting the time for the machine to automatically enter Auto mode from Standby.
Setting the time for the machine to automatically enter Standby mode from Auto.
Options to select continuous or intermittent agitator operation.
How to enable audible alerts for low or out mix conditions.
Displays current fault messages and guides for diagnosis.
Accessing and reviewing a log of past faults and their occurrences.
Reviewing a history of machine lockouts and their reasons.
Specific fault codes and explanations related to the Heat Treatment cycle.
Specific fault codes and explanations related to Auto mode operation.
Provides statistics on heat cycles performed since the last cleaning.
Displays detailed timing and temperature data for each heat cycle.
A comprehensive list of failure codes and their meanings for troubleshooting.
Displays control software version, language, and hardware details.
Shows real-time product viscosity and hopper/barrel temperatures.
Steps to manage the WiFi gateway for optional equipment connectivity.
Step-by-step instructions for assembling the freezing cylinder and its components.
Detailed process for correctly installing the beater assembly into the freezing cylinder.
Instructions for assembling the freezer door, including O-rings and the draw valve.
Step-by-step guide for assembling the internal components of the mix pump.
Detailed instructions for cleaning and sanitizing all parts of the machine.
Steps to prime the freezer with fresh mix before initial operation.
Daily tasks required to prepare the machine for the Heat Treatment cycle.
Final steps for setting up the machine before resuming normal operation.
Routine checks and steps performed before starting daily operation.
How to safely drain product from the freezing cylinder and mix hopper.
Procedures for manual brush-cleaning as required by health codes.
Steps for rinsing the machine components after cleaning and sanitizing.
Specific instructions for cleaning the mix hopper and its associated parts.
Step-by-step guide on how to disassemble the machine for cleaning and maintenance.
Detailed process for thoroughly cleaning disassembled parts using brushes.
Key checkpoints to ensure proper and safe cleaning and sanitizing operations.
Steps to diagnose and resolve issues related to bacterial counts in the product.
Routine inspections and checks for wear on critical machine components.
Guidelines for protecting the freezer when it is not in use during winter months.
Identifies causes and provides remedies for soft lock error messages on the display.
Identifies causes and provides remedies for hard lock error messages on the display.
Troubleshooting steps for issues where the control panel is unresponsive.
Diagnosing and resolving the cause of a squealing noise from the machine.
Addresses common reasons why the machine may not dispense product.
Identifies causes for soft product consistency and how to correct them.
Identifies causes for thick product consistency and how to correct them.
Addresses issues with the mix in the hopper being too warm.
Addresses issues with the mix in the hopper being too cold.
Troubleshooting steps for non-functioning mix level sensors.
Identifies causes and solutions for mix leaking from the door spout.
Addresses problems where the driveshaft becomes stuck in the coupling.
A schedule for routine replacement of wear parts to maintain optimal performance.
Summary of the limited warranty terms for the freezer equipment itself.
Specifies the requirements that must be met for the equipment warranty to be valid.
Lists items and conditions that are specifically excluded from equipment warranty coverage.
Outlines warranty limitations and the process for pursuing legal remedies.
Summary of the limited warranty terms for genuine Taylor replacement parts.
Specifies the requirements that must be met for the parts warranty to be valid.
Lists items and conditions that are specifically excluded from parts warranty coverage.
Outlines parts warranty limitations and the process for pursuing legal remedies.
To Next Page
General
