38 Chapter 7 - Parameters Description User Manual
Menu d - DISPLAY
Menu S - STARTUP
Menu I - INTERFACE
Menu F - FREQ & RAMP
Menu P - PARAMETER
Menu A - APPLICATION
Menu C - COMMAND
Menu H - HIDDEN
Menu of read-only parameters (display)
Menu for basic drive start up
Menu of input/output settings (digital/analog)
Menu of multi frequencies and ramps settings
Menu for drive regulation and optimization
Menu for PID function settings
Menu of control-type parameters (Save, Load default, etc.)
Menu not available on the keypad. It is reserved to set the drive parameters
through Serial line and/or through Field bus cards.
Chapter 7 - Parameter Description
7.1 Parameters List
Legend of drive menu contents.
NOTE!
In this chapter are described the functions of each drive parameter.
Anyway, the chapter 7 reports the description of the code and the name of each single parameter.
To Next Page
Loading...
