Teac AG-V2050 - Playing Video Sources; Video Tape Dubbing

Playing Video Sources
[Recording with a Video Deck
m& : Video signals
CN : Audio signals
POWER ON
oa
=
°O0
Cc
VIDEO 1 IN
or
VIDEO 2 IN
VCR 2/VDP 2
Speakers
1. Press the VIDEO 1 or VIDEO 2 button.
2. Play the component corresponding to the button
pressed.
3. The picture from the video source can be seen on
the TV and the sound from the video source will be
heard from the speakers.
Video Tape Dubbing
POWER ON m& : Video signals
Cc’ : Audio signals
= oo
°OOt @oo
VIDEO 2IN} 4 VIDEO 1 OUT
3 2
VCR 2/VDP
Playback
Recording
1. Press the VIDEO 2 button with the TAPE 2
MONITOR button set to OFF.
2. Operate VCR 2/VDP for playback.
3. Operate VCR 1 for recording. In this way, the
video/audio signals from VCR 2/VDP can be dubbed
onto VCR 1.
—18—