TEC FS-1450 - Paper Roll Replacement and Other Maintenance Operations

- 60 -
EO1-11097
Load new paper roll as described in Chapter 6.
15. PAPER ROLL REPLACEMENT AND OTHER MAIN-
TENANCE OPERATIONS
WARNING!
Care must be taken not to injure yourself with the paper cutter.
Replacing the Receipt Roll
1
2
3
4
RF
To remove the Receipt Cover, insert the Receipt
Cover Key to the Receipt Cover Lock, and turn it 90
clockwise.
Cut the Receipt Paper as shown in the figure.
Depress the [RF] key to feed the remaining paper
end.
CAUTION: Never try to pull out the remaining paper
end by hand.
It may cause paper jamming.