TEC FS-1450 - Installing the Receipt Roll

- 8 -
EO1-11097
6
Install the Receipt and Journal rolls (referring to the following
section "Installing the Receipt/Journal Roll") .
Installing the Receipt/Journal Roll
WARNING!
Care must be taken not to injure yourself with the paper cutter.
Installing the Receipt Roll
1
2
3
4
REG
X
SET
Z
MGR
-
Turn the Mode Lock to the REG position with power
ON.
To remove the Receipt Cover, insert the Receipt
Cover Key to the Receipt Cover Lock, and then turn
it 90˚ clockwise.
Cut the paper end to make it sharp.
Hold the paper roll so that the paper end will be fed
from the bottom.