TEC FS-3600 - Report

X Report Chapter 5 - Reports
5-30 FS-3600 Owner’s Manual
5.15 X Report
System
Revenue
Center Station User
   
The X Report allows a user to print a pre-defined sequence of
reports with a single command, without clearing any totals.
The option to include each report is set in the Function Setup table.
The pages/options for each report are shown on page 5-33
 Set the System X option for a report to print it with a System X
function.
• Reports set for the System X are also included with a
Revenue Center and Station X reports.
 Set the User X option for a report to print it with a User X
function.