Combine Checks Chapter 3 - Guest Check Functions
3-38 FS-3600 Owner’s Manual
3.10.4 Add New Check to Stored Check with Table #
This procedure is identical to using {ADD~TO~CHECK} except it is
used on checks with assigned table numbers. The current check
can be new (in the first service round).
1. Enter items for a new check, or recall a stored check.
2. Press {ADD~TO~TABLE}.
3. Screen displays table numbers for this server’s checks.
4. Press the button of the table number that the current check will
be combined with.
• If there are separate checks for the table, the screen will
display a list of the checks. Touch the check wanted.
• Items from the current check are added to the check of the
table number entered. That check now displays on the
screen.
5. Repeat steps 2 – 5 as needed to combine more checks.
6. End the service round by pressing {TOTAL}, {MEDIA} or
{PRINT~CHECK}.
To Next Page
Loading...
Need help?
General
