TEC FS-3600 - Clock out

Chapter 2 - Access the System Clocking In/Out
FS-3600 Owner’s Manual 2-5
2.2.2 Clock Out
Notes:
 Employees will be required to Declare Tips when clocking out if
their Job Code has TIPPED set to YES.
 A minimum declared tip entry can be required by setting option
MIN TIP in the System Config. Table to the minimum wanted.
Procedure
1. Index employee I.D.#.
2. Press {CLOCK~IN/OUT}.
• If prompted, index amount of cash tips, press {ENTER}.
• If prompted NOT ENOUGH TIPS, index manager I.D. # and
press {ENTER}.
3. Receipt printer prints a clock out report with the employee’s
name, Job Code, time/date and the total hours worked both for
this shift and this week.