TEC FS-3600 - Tender with {MEDIA~NLU

Chapter 3 - Guest Check Functions Tender the Check
FS-3600 Owner’s Manual 3-53
3.12.7 Tender with {MEDIA~NLU}
The {MEDIA~NLU} key was designed as a FS-2700 function but can
be used on the FS-3600.
 The numeric entry indexed prior to pressing {MEDIA~NLU} is
recognized as the media’s I.D., so an amount tendered is not
used.
 If using the {MEDIA~NLU} key with split tendering, make sure
the SPEED TENDER option is set to NO, so the user is
prompted for the amount of the tender.
 See the chart on page 3-48 for how the SPEED TENDER and
PAY IN FULL options work since the amount tendered cannot be
entered prior to selecting the media with the {MEDIA~NLU} key.
Procedure
1. Enter item(s) or recall the check.
2. Index the media I.D. number wanted and press {MEDIA~NLU}.
• If SPEED TENDER is NO, screen prompts:
Enter amount:
3. Index the amount and press {TOTAL}.
Overtender to Tip with {MEDIA~NLU}
 SPEED TENDER and PAY IN FULL in the Media Setup table
should be set to NO if using {MEDIA~NLU}.
1. Enter item(s) or recall the check.
2. Index the media I.D. number wanted and press {MEDIA~NLU}.
3. Screen prompts:
Enter amount:
4. Index the total amount received, including the amount of the tip.
5. Press {TOTAL}.