Chapter 3 - Guest Check Functions Transfer a Guest Check
FS-3600 Owner’s Manual 3-33
3.9 Transfer a Guest Check
3.9.1 Transfer to a Server
This procedure is done by the server who created the check.
Procedure
1. Recall the check. Should be done by the server responsible for
the check or a manager.
2. Press {XFER~CHK~TO~SVR} key.
3. Screen prompts:
Enter ID
4. Index the I.D. number of the server the check is being
transferred to.
5. If the default Order Type for the new server requires a table
number and the check does not have one assigned, screen
prompts:
Enter table number
6. Index the table number on the keypad which automatically
displays and press {ENTER}.
7. If the default Order Type for the new server requires a # of guest
entry and the check does not have one assigned, screen
prompts:
Enter guest count
8. Index the number of guests and press {ENTER}.
9. Press the {TOTAL} key the end the procedure. Check is
transferred.
To Next Page
Loading...
