TEC FS-3600 - Order Type

New Check Prompts Chapter 3 - Guest Check Functions
3-6 FS-3600 Owner’s Manual
3.2.3 Order Type
 All checks must be assigned to an Order Type. Most Job Codes
will be assigned a default Order Type. Or, the user can be
prompted to enter the Order Type for each guest check.
 An Order Type can be required as an entry for a particular work-
station.
• The DEFAULT ORDER TYPE in the Job Code Table for the
employee’s Job Code must be set to NONE (press the
CLEAR key).
 An entry for the Order Type must be completed before a menu
item can be entered on the check.
Procedure
1. Before entering a menu item, press an {ORDER~TYPE} key for
this check.
• Pressing an {ORDER~TYPE} key will also override a default
Order Type assigned to the Job Code for one order only.