TEC FS-3600 - Transfer from a Server

Transfer a Guest Check Chapter 3 - Guest Check Functions
3-34 FS-3600 Owner’s Manual
3.9.2 Transfer from a Server
This procedure is used by the new server, who takes the check from
the server/bartender who created it.
Procedure
1. Press {XFER~CHK~FROM~SVR} key.
2. Screen prompts:
Enter check number
3. Index the check number being picked up, using the keypad
which automatically displays, and press {ENTER}.
4. If the default Order Type for the new server requires a table
number and the check does not have one assigned, screen
prompts:
Enter table number
5. Index the table number on the keypad which automatically
displays and press {ENTER}.
6. If the default Order Type for the new server requires a # of guest
entry and the check does not have one assigned, screen
prompts:
Enter guest count
7. Index the number of guests and press {ENTER}.
8. Press the {TOTAL} key the end the procedure. Check is
transferred.