TEC FS-3600 - Add New Check to Stored Check; Add to Stored Check by Order Type

Chapter 3 - Guest Check Functions Combine Checks
FS-3600 Owner’s Manual 3-37
3.10.2 Add New Check to Stored Check
This procedure is used to add the current check to a stored check.
The current check can be a new check (in the first service round).
1. Enter items for a new check, or recall a stored check.
2. Press {ADD~TO~CHECK}.
3. Screen displays check numbers for this server’s checks.
4. Press the button of the check number that the current check will
be combined with.
• Items from the current check are added to the check number
entered. That check now displays on the screen.
5. Repeat steps 2 – 5 as needed to combine more checks.
6. End the service round by pressing {TOTAL}, {MEDIA} or
{PRINT~CHECK}.
3.10.3 Add to Stored Check by Order Type
This procedure is identical to using {ADD~TO~CHECK} except it
restricts the choices to the server’s open checks of a certain Order
Type. The current check can be new (in the first service round).
1. Enter items for a new check, or recall a stored check.
2. Press {ADD~TO~CHK~OT#}.
3. Screen displays check numbers for this server’s checks.
4. Press the button of the check number that the current check will
be combined with.
• Items from the current check are added to the check number
entered. That check now displays on the screen.
5. Repeat steps 2 – 5 as needed to combine more checks.
6. End the service round by pressing {TOTAL}, {MEDIA} or
{PRINT~CHECK}.