New Check Prompts Chapter 3 - Guest Check Functions
3-8 FS-3600 Owner’s Manual
3.2.5 Override Meal Period
Meal Periods are set up by time for each day of the week in the Meal
Period Setup table. The current setting can be overridden for the
current check only or for all checks until the System Z report is done.
The change can affect one terminal or all terminals.
For One Check Only
1. Press a {MEAL~PERIOD} key which has been set for the Meal
Period wanted for this check.
• The override setting reverts back to the preset Meal Period
after the check is sent.
For All Checks Today
1. Press {STAY~DOWN}.
2. Press the {MEAL~PERIOD~#} key wanted.
3. Screen prompts:
Broadcast changes?
1 – Yes, 0 - No
4. Press {YES} for the change to be effective at all stations in the
system.
Press {NO} for the change to affect this station only.
• The override setting will be effective until the Meal Period is
changed again, or until the next System Z report is done.
To Next Page
Loading...
Need help?
General
