Technics SA-DX930 User Manual

wonensuaun
———————————————Á'—Ó
1 1
(D Tuned indicator (TUNED) ...................... BENNP
(2 Monaural indicator (MONO) ..................... 20
(3) Stereo indicator (STEREO) .............................. 20
@ Memory indicator (DD) ............................... 22
®© Surround format indicators
(283, OOPRO LOGIC, DODIGITAL) ............... 24
© Front speaker indicator
(-SPEAKERS- (3O).................. ern 18
@) Low impedance indicator (LOW IMP) ............. 19
Display
(8 Frequency unit indicator (kHz, MHz) .............. 20
*sanppacnenusupsvuenvuusuvtapttónseete e veeevesaananaa
:MHzz »ustbtvtur
(0 Speaker indicators ..................................... 17
@) Signal format indicators
(L, C, R, LS, RS, LFE)
These indicators light up to indicate each input signal format.
L: Front channel (left)
C: Center channel
R: Front channel (right)
LS: Surround channel (left)
RS: Surround channel (right)
"LFE" (Low Frequency Effect) is a channel for the deep-bass
effect in the low frequency range.
7
RQT4918

Technics SA-DX930 Specifications

General

Impedance	8 ohms
Weight	11.5 kg
Video Connections	Composite video input/output
Power Output	100 watts per channel (8 ohms, 20 Hz - 20 kHz, 0.09% THD)
Total Harmonic Distortion	0.09%
Input Sensitivity	200mV
Tuning Range	FM, MW
Speaker Load Impedance	8 ohms
Input Sensitivity/Impedance	200 mV / 47k ohms (CD)