TechniSat DigitRadio 110 IR

15
EN
FR
IT
NL
PL
CZ
SK
a. Press buons to cycle through the alphanumeric character list, press OK buon to
select an appointed character.
Note: WEP/WPA pass codes are case-sensitive.
b. If a wrong operation is being conducted, select to delete designated character.
Note: = Backspace; means return to previous track; radio will automatically
save the WEP/WPA you’ve input, so no bother to re-enter these codes.
c. Aer selecting the final character of your password, press buons to , and
then press OK buon to confirm. The radio is connected to wireless network.
2) Devices that support connection via WPS (Wi-Fi Protected Setup) are identified in the list as
[WPS].
a. If you wish to establish a connection via WPS, press OK buon aer you have selected desired
network. The radio then oers the option to initiate WPS.
b. Press or buon to select through PUSH Buon, PIN and Enter Passkey, press OK buon to
confirm.