TechniSat DIGITRADIO 580

18
Push Buon You must start the WPS scan on the remote station
(e.g. router). Consult the manual for your router or
Access Points (AP) to learn how to do this.
Aer you have done this, press SCROLL/SELECT/
SNOOZE knob on the radio and then both devices
will establish a connection
Pin The radio creates an 8-digit number, which you
then have to enter into the remote station.
Aer entering the PIN, press the SCROLL/SELECT/
SNOOZE knob to establish the connection between
both devices.
Skip WPS In addition to a WPS connection, you can also
establish a connection using a Pre-Shared-Key. The
required key is oen on the rear of the router, or
you may have defined it yourself.
This method is used automatically for networks
without WPS. You can call up the Pre-Shared-Key
function on networks with WPS by selecting menu
item “Skip WPS”.
An input field should now appear. You can enter
the required key (PSK) by turning and pressing
SCROLL/SELECT/SNOOZE knob, and then select
“OK” and press SCROLL/SELECT/SNOOZE knob
complete the entry. The radio should now establish
the connection to the network.
18