TechniSat DIGITRADIO UP 1

4 Description of the DIGITRADIO UP1
4.1 Scope of delivery
Before start-up, please check whether everything has been delivered.
1 x DIGITRADIO UP1
1 x instruction manual
1 x Dual Installation Frame
1 x Antenna
Aachment materials
4.2 The special features of the DIGITRADIO UP1
The DIGITRADIO UP1 is comprised of a DAB+/FM receiver with the following
functions:
- You can store up to 10 DAB+ and 10 FM stations.
- The radio receives on the FM 87.5–108 MHz (analogue) frequencies and
DAB+ 174.9–239.2 MHz (digital).
- The device has a time and date display.
- Alarm function and sleep timer
- Music playback via Bluetooth
5 General device functions
5.1 Switching on the device
> Press the /Mode buon to switch on the DIGITRADIO UP1.
Aer switching on for the first time the device automatically performs a
complete scan in DAB mode. While scanning, the display information shows
the progress, as well as the number of digital radio stations detected. Aer
completing the station scan the first DAB+ channel is played.
5.2 Switching o the device
> Keep the /Mode buon depressed to switch the device to standby mode.
[Standby] appears briefly on the display. The date and time are shown on the
display. The display brightness in standby mode can be adjusted by following
the instructions in section 11.2.
5.3 Changing to DAB+/FM/Bluetooth mode
> Press the /Mode buon briefly to switch between DAB+ (Digital Radio), FM
and Bluetooth.
5.4 Adjusting the volume
> Adjust the volume using the Vol +/- buons. The set volume is shown on the
display by way of a bar chart.
13
EN
FR
IT
NL
NW
DK
PL
CZ
SK