8.6 Audio seings
> Keep the Info/Menu buon depressed and use the << or >> buons to select
the [Audio Seing] item.
> Press the Enter buon.
> Using the << or >> buons, select the item [Stereo possible] or [Mono only].
> Press the Enter buon to confirm.
Given that the DIGITRADIO UP1 is a mono device, this seing only aects the
station reception intensity.
8.7 Saving FM stations to a memory slot
The station memory can save up to 10 stations in the FM range.
> First set the desired station frequency.
> In order to store this station on a memory slot, keep the Preset buon
depressed while playing. Then use the <<, >> buons to select a station
memory slot (1-10). Press the Enter buon to save.
> Repeat this process to save other stations.
8.8 Retrieving FM stations from a memory slot
> In order to retrieve a station that you have previously stored in the FAV
memory, briefly press the Preset buon and use the <<, >> buons to select a
station memory slot (1-10). Press the Enter buon to play the station.
If you have no station saved to the selected station slot [(empty)] appears on
the display.
8.9 Overwriting/deleting a station memory slot
> Simply save a new station to the respective memory slot as described.
When retrieving the factory seings all memory slots are deleted.
9 Bluetooth
> Briefly press the /Mode buon until [Bluetooth] is shown on the display.
If Bluetooth mode is being launched for the first time, a playback device, e.g. a
smartphone or tablet, must be paired with the DIGITRADIO UP1.
If a playback device has already been paired once and it is located in the
reception range, it will be automatically connected.
19
EN
FR
IT
NL
NW
DK
PL
CZ
SK