TechniSat DIGITRADIO UP 1 - System Settings; Time and Date Settings; Manually Setting Time;Date; Time Update Options

11 System seings
All the seings referred to in this section apply equally to DAB+/FM, as well as to
Bluetooth mode.
11.1 Time and date seings
11.1.1 Manually seing the time/date
Depending on the seing for time updates (section 11.1.2), the time and date have to
be set manually.
> Keep the Info/Menu depressed and use the << or >> buons to select the
[Time] item.
> Press the Enter buon.
> Using the << or >> buons, select the item [Time/Date Seing] and press
Enter.
> The first time digits (hours) flash and can be changed using the << or >>
buons.
The >> buon increases the value, the << buon decreases the value.
> Press Enter to confirm the seing.
> The next time digits (minutes) start to flash and can again be changed as
described above.
> Press Enter aer every other seing in order to go to the next seing.
> To set the date, proceed in the same way as described above.
> Aer all seings have been done and the Enter buon pressed, [Time Saved]
appears on the display.
11.1.2 Time update
In this submenu, you can determine whether the time update should be done
automatically via DAB+ or FM, or whether you wish to enter it manually (section
11.1.1).
> Keep the Info/Menu depressed and use the << or >> buons to select the
[Time] item.
> Press the Enter buon.
> Use the << or >> buons to select the [Update Seings] item and press
Enter.
> Select the following options using the << or >> and Enter buons:
[Update All] (update via DAB+ and FM), [Digital Radio] (update via DAB+
only), [FM] (update via FM only), [No Update] (time/date must be entered
manually, see section 11.1.1).
23
EN
FR
IT
NL
NW
DK
PL
CZ
SK