[Standby] regulates the brightness in standby mode. You can choose from
the [High], [Middle], [Low] brightness intensities and [O]. Using the << or
>> buons, select a brightness intensity and press the Enter buon to save.
If the [O] option is selected, the display lighting will be switched o
completely on standby aer approx. 10 seconds.
11.3 Language
> Keep the Info/Menu buon depressed and use the << or >> buons to select
the [Language] item.
> Press the Enter buon.
> Using the << or >> buons, select one of the available languages and confirm
by pressing the Enter buon.
11.4 Factory seing
If you change the location of the device, e.g. when moving house, it is possible that
the saved stations can no longer be received. In this case you can reset the device to
factory seings to delete all the saved stations and then launch a new scan.
> Keep the Info/Menu buon depressed and use the << or >> buons to select
the [Factory Seing] item. Press the Enter buon.
> Using the << or >> buons, select the [Yes] item to reset to the factory seing
and press the Enter buon.
All previously stored stations and seings will now be deleted. The device is
now in the same status as when delivered.
> [Restart...] appears on the display and the device initiates. Following this, the
device automatically performs a complete scan in DAB mode. While scanning,
the display information shows the progress, as well as the number of digital
radio stations detected. Aer completing the station scan the first DAB+
channel is played.
11.5 Soware version
Under SW version you can retrieve the currently installed soware version.
> Keep the Info/Menu buon depressed and use the << or >> buons to select
the [SW Version] item.
> Press the Enter buon. The current soware version is displayed.
25
EN
FR
IT
NL
NW
DK
PL
CZ
SK