Technosoft iPOS360 VX-CAN Series - ECAT-VX Ethercat Adapter Pinouts; Mating Connectors for ECAT-VX Adapter; Ethercat VX Adapter to Ipos360 X Interconnections

 Technosoft 2019 21 iPOS360x VX-CAN/CAT Technical Reference
3.6.5 ECAT-VX EtherCAT adapter pinouts
The ECAT-VX adapter is used to connect an iPOS Intelligent drive to the EtherCAT network.
3.6.6 Mating Connectors for ECAT-VX adapter
Producer Part Number Description Images
Tyco
1-1775801-4
PCIe 1x vertical card edge
connector,1.0mm pitch, 2x18 contacts
FCI 10018784-11100TLF
Tyco
1761465-1
PCIe 1x horizontal card edge
connector,1.0mm pitch, 2x18 contacts
Samtec PCIE-036-02-F-D-RA
3.6.7 EtherCAT VX adapter to iPOS360x interconnections
ECAT
VX
pin
Signal
Name
Direction
iPOS360x
VX pin
A2 Data In <- A4
B11 Data Out -> A7
B4 Clock <- A2
A1 Chip
Select
<- A5
A4 Interrupt -> B6
A6 Sync -> B8
A5 ECAT
Ready
-> B7
B1 CS1 <- π
π = Connect CS1 to ECAT VX pin A11(+3.3V)