Technosoft iPOS360 VX-CAN Series - Cautions; Quality System, Conformance and Certifications

 Technosoft 2019 8 iPOS360x VX-CAN/CAT Technical Reference
WARNING! THE DRIVE MAY HAVE HOT SURFACES DURING OPERATION.
WARNING!
DURING DRIVE OPERATION, THE CONTROLLED MOTOR WILL MOVE. KEEP
AWAY FROM ALL MOVING PARTS TO AVOID INJURY
1.2 Cautions
CAUTION!
THE POWER SUPPLIES CONNECTED TO THE DRIVE MUST COMPLY WITH THE
PARAMETERS SPECIFIED IN THIS DOCUMENT
CAUTION!
TROUBLESHOOTING AND SERVICING ARE PERMIT
TED ONLY FOR
PERSONNEL AUTHORISED BY TECHNOSOFT
CAUTION!
THE DRIVE CONTAINS ELECTROSTATICALLY SENS
ITIVE COMPONENTS
WHICH MAY BE DAMAGED BY INCORRECT HANDLING. THEREFORE THE DRIVE
SHALL BE REMOVED FROM ITS ORIGINAL PACKAGE ONLY IN A
N ESD
PROTECTED ENVIRONMENT
To prevent electrostatic damage, avoid contact with insulating materials, such as synthetic fabrics or plastic surfaces.
In order to discharge static electricity build-up, place the drive on a grounded conductive surface and also ground
yourself.
1.3 Quality system, conformance and certifications
IQNet and Quality Austria certification about the implementation and maintenance of the
Quality Management System which fulfills the requirements of Standard ISO 9001:2015.
Quality Austria Certificate about the application and further development of an effective
Quality Management System complying with the requirements of Standard ISO 9001:2015
REACH Compliance - TECHNOSOFT hereby confirms that this product comply with the
legal obligations regarding Article 33 of the European REACH Regulation 1907/2006
(Registration, Evaluation, Authorization
and Restriction of Chemicals), which came
into force on 01.06.2007.
RoHS Compliance - Technosoft SA here with declares that this product is
manufactured in compliance with the RoHS directive 2002/95/EC on the restriction of
the use of certain hazardous substances in electrical and electronic equipment (RoHS)
Technosoft SA hereby declares that this product conforms to the following European
applicable directives:
2014/30/EU Electromagnetic Compatibility (EMC) Directive
2014/35/EU Low Voltage Directive (LVD)
93/68/EEC CE Marking Directive
Conflict minerals statement - Technosoft declares that the company does not purchase
3T&G (tin, tantalum, tungsten & gold) directly from mines or smelters...
We have no indication that Technosoft products contain minerals from conflict mines
or smelters in and around the DRC.
For other certifications visit: http://technosoftmotion.com/en/quality-system