4-138
05- 38 Preser Speed 10-Dec time
05- 39 Preser Speed 11-Acc time
05- 40 Preser Speed 11-Dec time
05- 41 Preser Speed 12-Acc time
05- 42 Preser Speed 12-Dec time
05- 43 Preser Speed 13-Acc time
05- 44 Preser Speed 13-Dec time
05- 45 Preser Speed 14-Acc time
05- 46 Preser Speed 14-Dec time
05- 47 Preser Speed 15-Acc time
05- 48 Preser Speed 15-Dec time
Range 【0.0~6000.0】 Sec
When 05-00=0, accel/decal set by parameter 00-14~00-17/00-21~00-24.
When 05-00=1, individual accel/decal apply to each preset speed 0~15, parameters
05-17~05-48.
Formula for calculating acceleration and deceleration time：
When 01-00=F, maximum output frequency set by 01-02.
When 01-00≠F, maximum output frequency is 50.00 (or 60.00/90.00/120.0/180.0)
Example：
01-00≠F, 01-02=50Hz (maximum output frequency), 05-02=10Hz (presser speed 1),
05-17=5s (Accel-time), 05-18=20s (Decel-time)
Example：
Acceleration/Deceleration timing when 05-00=1 is set to 1.
In this example the following parameters are set：
00-02=1 (External terminal operation)
S1：03- 00=0 (Terminal S1：Forward/stop)
S2：03- 01=1 (Terminal S2：Reverse/stop)
S3：03- 02=2 (Terminal S3：Preset speed 1)
S4：03- 03=3 (Terminal S4：Preset speed 2)
S5：03- 03=4 (Terminal S5：Preset speed 3)
To Next Page
Loading...
