TECO E510s Series - Page 258

4-192
11- 69 Gain of Preventing Oscillation 2
Rang 【0.00~200.00】%
 Adjust the response of Gain of Preventing Oscillation 3
If occur vibration with motor in ND mode, please increase by 0.01 unit to set.
11- 70 Upper Limit of Preventing Oscillation 2
Rang 【0.01~100】%
 It is required to limit the preventing oscillation 3 upper limit within the setting value.
11- 71 Time Parameter of Preventing Oscillation 2
Rang 【0~30000】mSec
 Adjust the response of oscillation 3 function.
(Time parameter of adjust preventing oscillation function delay.)
11- 72 Switching Frequency 1 of Preventing Oscillation 2
Rang 【0.01~300.00】Hz
11- 73 Switching Frequency 2 of Preventing Oscillation 2
Rang 【0.01~300.00】Hz
11-72(Switching Frequency 1) and 11-73(Preventing Oscillation 2) setting as the photo below.