TECO E510s Series - Page 317

4- 251
3、 Analog comparator function
Symbol Description
 Analog comparator mode (1~3)
 Input comparison value selection (AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7)
 Current analog input value

Set the reference comparison value (Upper limit)
(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )

Set the reference comparison value (lower limit)
(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )
 Comparator output (G1 to G8, there are a total of 8 comparators)
The description of analog comparison mode：
(1) Analog comparison mode 1 ( ≤ ,  ON)
(2) Analog comparison mode 2 ( ≥ ,  ON)
(3) Analog comparison mode ( ≤  ≤ ,  ON)
Input comparison value selection (V1~V7)
(1) Input comparison value selection = V1： Set frequency
(2) Input comparison value selection = V2：
O
peration frequency
(3) Input comparison value selection = V3：
A
I1 input value
(4) Input comparison value selection = V4：
A
I2 input value
(5) Input comparison value selection = V5：Keypad input value
(6) Input comparison value selection = V6：
O
peration current
(7) Input comparison value selection = V7：
T
orque value