TECO E510s Series - Page 319

4- 253
5. Summation and subtraction functions
RESULT（calculation result）= V1+ V2- V3
Symbol Description
 Calculation result : RESULT
 Addend V1(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )
 Addend V2(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )
 Subtrahend V3(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )
 Coil output of error signal (M1~MF)
 Addition and subtraction modes number (AS1~AS4)
6. Multiplication and division modes
RESULT（calculation result）=V1*V2/V3
Symbol Description
 Calculation result : RESULT
 Multiplier V1(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )
 Multiplier V2(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )
 Divisor V3(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )
 Coil output of error signal（M1~MF）
 Multiplication and division modes number (MD1~ MD4)