TECO E510s Series - Page 397

AP 3-27
Table 5 Analog value property list (Read/Write)
No. Object Name Description Unit Classification Range
AV0 PID-P Gain Proportional gain (P) No Units R/W 0-10
AV1 PID-I Time Integral time (I) No Units R/W 0-100
AV2 PID-D Time Differential time (D) No Units R/W 0-10
Table 6 Digital input property list (Read)
No. Object Name Description Unit Classification Range
BI0 Run/Stop Operation status Stop / Run R 0-1
BI1 Direction Operation direction FWD/REV R 0-1
BI2 status Inverter status OK/Fault R 0-1
BI3 Abnormal Error occurs Close/Open R 0-1
BI4 DI_1 status S1 status Close/Open R 0-1
BI5 DI_2 status S2 status Close/Open R 0-1
BI6 DI_3 status S3 status Close/Open R 0-1
BI7 DI_4 status S4 status Close/Open R 0-1
BI8 DI_5 status S5 status Close/Open R 0-1
BI9 DI_6 status Operation status Close/Open R 0-1
Table 7 Digital output property list (Read/Write)
No. Object Name Description Unit Classification Range
BO0 RY1 status Relay output 1 status Close/Open R 0-1
BO1 RY2 status Relay output 1 status Close/Open R 0-1
BO2 - - - - -
Table 8 Digital value property list (Read/Write)
No. Object Name Description Unit Classification Range
BV0 RUN/STOP RUN/STOP Stop / Run R/W 0-1
BV1 FWD/REV FWD/REV FWD/REV R/W 0-1