TECO JSDG2S-100A3-E - Page 372

7-10
Parameter Code Name and Function Unit RS485 Index
-- Pn351 Gantry synchronization controller gain value rad/s 033EH -
-- Pn352 Gantry synchronization maximum error tolerance pulse 033FH/0340H -
★
Pn354 Single Revolution Pulse Command Function pulse 0342H/0343H 2336H
-- Pn355 Return to Origin function operating mode - 0344H 2337H
-- Pn356 Pulse Response Filter Hz 0345H 2338H
★
Pn357
Positive software limit unit/PLS 0346H/0347H 2339H
★
Pn358
Reverse software limit unit/PLS 0348H/0349H 233AH
-- Pn359
Backlash compensation parameters in CW direction
of Turret & Tool magazine
pulse 034AH/034BH 233BH
★
Pn360
Turret & Tool magazine INP and tool number output
delay time
1ms 034CH
233CH
★
Pn361
Sensorless homing torque limit value % 034DH 233DH
★
Pn362
Torque stabilization continuous time for sensorless
home return
1ms 034EH
233EH