TECO JSDG2S-100A3-E - 4-1 No-load Servo Motor Trial Run

2-10
2. CN1 is 50 Pins SCSI Connector.
3. CN2 is 20 Pins SCSI Connector.
4. CN3 is 5 Pins Mini USB Connector.
5. CN4 is 8 Pins Mini-Din type Connector.
6. CN5/CN6 is 8 Pins RJ45 Connector.
7. JSDG2S-E(L) does not have TIC, SIC, MON1, MON2, +15V and -15V.