TECO JSDG2S-20A-EL - Page 110

3-24
Please follow the steps below to use the Error Alarm History Parameters to inquire the past nine
Error Alarms.
Steps
Operation
Key
LED Display Screen
after Operation
Description
1
Turn on
Power
When the power is turned on, Enter the
Status
Display Screen
.
2
Press MODE Key three times to enter the
Error
Alarm History Parameter
.
3
Press UP Key one time, to select the
Previous first
Alarm History
item, two LEDS on the right side
display the
Alarm Number
of 003 (Motor Overload).
4
Press UP Key one time, to select the
Previous second
Alarm History
item, two LEDS on the right side
display the
Alarm Number
of 001 (Power Supply
Voltage Too Low).