TECO JSDG2S-20A-EL - 2-1-7 Recommend specification of circuit breaker; fuse;noise filter

2-16
2-1-7 Recommend specification of circuit breaker/ fuse/noise filter
•
Please make sure to install IEC-standard or UL-certified circuit breakers and fuses
between the input power supply terminal and the servo driver.
•
To avoid any environmental interference caused by servo driver operation, the combination
of appropriate noise filter can effectively
decrease EMI as well as eliminate environmental interference.
Recommend specification of circuit breaker/ fuse/noise filter
Servo Model
Number
Circuit
breaker
Fuse Noise Filter
Specification Recommended model Recommended model
JSDG2S-10A 10A 20A Bussmann 20CT Schaffner FN3258-16
JSDG2S-15A 10A 20A Bussmann 20CT Schaffner FN3258-16
JSDG2S-20A 15A 20A Bussmann 20CT Schaffner FN3258-16
JSDG2S-30A 15A 20A Bussmann 20CT Schaffner FN3258-16
JSDG2S-50A3 30A 40A Bussmann 40FE Schaffner FN3258-16
JSDG2S-75A3 30A 40A Bussmann 40FE Schaffner FN3258-16
JSDG2S-100A3 50A 63A Bussmann 63FE Schaffner FN3258-42
JSDG2S-150A3 50A 63A Bussmann 63FE Schaffner FN3258-42
JSDG2S-200A3 75A 100A Bussmann 100FE Schaffner FN3258-42
JSDG2S-300A3 125A 100A Sensata QFS25U-100 Schaffner FN3258-100
JSDG2S-10B 10A 4A Bussmann KLM-4 Schaffner FN3258-16
JSDG2S-15B 10A 4A Bussmann KLM-4 Schaffner FN3258-16
JSDG2S-25B 10A 10A Bussmann 10CT Schaffner FN3258-16
JSDG2S-35B 15A 20A Bussmann 20CT Schaffner FN3258-16
JSDG2S-50B 20A 20A Bussmann 20CT Schaffner FN3258-42
JSDG2S-75B 30A 40A Bussmann 40FE Schaffner FN3258-42
JSDG2S-100B 30A 50A Bussmann 50FE Schaffner FN3258-42
JSDG2S-150B 50A 80A Bussmann FWP-80B Schaffner FN3258-100
JSDG2S-200B 50A 80A Bussmann FWP-80B Schaffner FN3258-100